Same as before, in order to connect DHT22 sensor we first need to connect two pins (from left to right) with a 10kΩ resistor. Same as in the previous step, use resistor legs and wrap them around the two sensor legs (just make sure they are touching each other).
After wrapping them, use a soldering iron and solder them together.
After you have placed your resistor correctly, now is the time to connect everything to the breadboard.
From left to right, connect each pin as follows:
Red wire to 12E.
Yellow wire to 3F.
Black wire to 11D.
In order to connect DHT22 to breadboard you can use male to female jumper cables or you can make custom wires using female crimp pins, as you have already learned in wiring tutorial.
DHT22 sensor connected to breadboard.
Updated almost 3 years ago